Outdoor Structures Built to Last
Exterior Renovations in Orlando for properties needing deck reconstruction, roofing system repairs, or accessibility ramp installations
Deck boards rot where water pools against fascia trim, roof shingles lift when underlayment deteriorates under summer heat, and exterior paint fails when moisture trapped behind siding pushes coatings off the substrate. Custom-built decks account for joist spacing that prevents bounce underfoot, whether posts need concrete footings below frost lines, and how flashing diverts water away from ledger boards bolted to house framing. PJC Solution Inc addresses these issues through deck construction and repair, roofing installation and repair, window installation, exterior painting, wood rot repair, and pressure washing that removes years of accumulated grime without damaging siding profiles.
Roofing work evaluates whether sheathing beneath shingles has cupped or split, how valleys are lined to shed water toward gutters, and whether ventilation allows attic heat to escape rather than cooking shingles from beneath. ADA-compliant wheelchair ramps are built with proper slope ratios, handrails anchored to posts sunk below frost depth, and landings sized to allow directional changes without excessive maneuvering. Window installation seals frames against air infiltration using flashing tape layered in sequence so water drains outward at every overlap.
Arrange an exterior property inspection to evaluate deck framing, roofing condition, and accessibility modification requirements.
How Exterior Work Addresses Structural Wear
Custom deck construction begins with locating posts so joists span no more than code-allowed distances for the decking material used, whether composite boards rated for sixteen-inch spacing or traditional lumber requiring twelve-inch joist intervals. Ledger boards attach to house framing with lag bolts long enough to reach solid wood behind exterior sheathing, with metal flashing tucked under siding to guide water down and over the ledger rather than behind it. Patio construction pours concrete thick enough to resist freeze-thaw cracking, with control joints cut at intervals that allow slabs to move slightly without breaking apart randomly.
After roofing repairs, shingles lie flat without visible buckling, flashing around chimneys and vent pipes seals without gaps where water can enter, and granules remain embedded in asphalt coatings rather than washing into gutters. Wood rot repair cuts back to solid material before installing primed replacement boards, since painting over spongy wood only traps moisture and accelerates decay. Pressure washing removes mold, algae, and dirt buildup without gouging wood siding or forcing water behind seams where it saturates insulation.
Exterior painting preparation includes scraping loose coatings, sanding rough edges smooth, priming bare wood to seal tannins that bleed through topcoats, and caulking gaps where trim meets siding. Window installation shims frames square in rough openings before fastening, since out-of-square windows bind when operated and leak air around sashes that don't seat properly against weatherstripping.
Answers to Frequent Service Questions
Property owners planning exterior upgrades usually want to know how deck framing prevents long-term settling and what roofing repairs involve beyond shingle replacement.
What does custom deck construction include structurally?
Deck framing involves digging post holes below local frost depth, setting posts in concrete footings, bolting beams to posts with galvanized hardware, spacing joists according to decking manufacturer specifications, and installing flashing where the ledger attaches to the house to prevent water infiltration.
How is wood rot identified before it spreads?
Wood rot shows up as discolored areas that feel soft when prodded with a screwdriver, paint that peels in sheets rather than flaking, and structural members that deflect more than adjacent sound wood when pressure is applied.
What determines whether roofing requires full replacement or repair?
Full replacement is necessary when multiple shingles across different roof sections show granule loss, when decking sags between rafters, or when previous repairs have layered more than two shingle courses in violation of code, while isolated damage from storm impacts can be repaired by replacing affected sections.
When does pressure washing damage siding or decking?
Excessive pressure above fifteen hundred PSI gouges wood grain, forces water behind siding seams, and strips paint that's adhered soundly, while appropriate pressure combined with proper nozzle distance removes buildup without substrate damage.
How do wheelchair ramps attach to existing home entries?
Ramps are anchored to concrete footings independent of house foundations, with top landings positioned so door swings don't interfere with wheelchair maneuvering and handrails extending beyond the top and bottom of the slope to provide support during transitions.
PJC Solution Inc builds decks and patios that account for drainage patterns, repairs roofing systems before leaks damage interior spaces, and installs accessibility ramps that meet structural and code requirements. Contact us to schedule a site evaluation and receive a detailed project estimate.